Buddy Rider Accessories

All Buddyrider orders are final sale unless defective

We highly recommend bringing your bike in store to ensure compatibility

Choose the seat, additional receiver or Booster cushion

Designed for dogs up to 11.5kg (25 pounds) and bicycles with at least 48 cm (19") between the seat post and the handlebar stem. Includes all brackets and hardware to mount to bicycle. Can not be Mounted to Carbon Fiber Seat Post. If you have a carbon fiber seat post you must replace it with an aluminum or steel seat post.

Safety Warning Please Read
If you choose to purchase and install the Buddyrider pet seat, you do so at your own risk. Cycling can be inherently dangerous especially when carrying passengers or cargo of any kind. You must wear protective gear at all times (helmet and gloves etc).
The owners, directors, employees, and or any other representatives of the Buddyrider will not be held responsible for damage caused or injury sustained through the use of the Buddyrider pet seat. Further more you assume all risks associated with the fitting and use of the Buddyrider pet seat.

Your pet must be secured in the seat at all times using the safety harness provided. See Installation and Instructions page.

DO NOT MOUNT TO CARBON FIBER SEAT POST.
If you have a carbon fiber seat post you must replace it with an aluminum or steel seat post.

Will The Buddyrider Fit My Bike?

Below is a step by step way to help determine if the Buddyrider will fit your bike.

First of all there are 3 important points to note:

1. A traditional ladies bike with the lower frame in front of the seat allows you to mount the bike by stepping through and then sitting. This can no longer be accomplished with the Buddyrider mounted there. You must mount and dismount the bike gentleman style straight over the seat from the side.

2. If your bike has a suspension seat post, this must be replaced with a rigid seat post so that the Buddyrider is mounted high enough both for fit, and your comfort. They are available at most bike stores.

3. If you have a carbon fiber seat post you must replace it with an alumimum or steel seat post.

Fitting Checklist

Adjust and set your seat height in a safe and comfortable position, low enough so both feet can touch the ground when stopped.

Measure the exposed seat post below your seat. Is it between 1” and 1 ¼” diameter? (2.54cm and 3.17cm) Is there at least 1 ¾” (4.5cm) of seat post showing to attach the Buddyrider?

Next, measure at right angles from the seat post. Do you have at least 19” (48.5 cm) of clearance?

If you answered "yes" to all of the above questions it is very likely that Buddyrider will fit your bike.

Some exceptions may apply.