Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes
Reflective Berlin Reflective Shapes - Cubes

Reflective Berlin Reflective Shapes - Cubes

Regular price$19.99


/
Shipping calculated at checkout.
Available for pickup in:
loading..

Color

WE DANCE IN THE HEXAGONΒ 

We've had a pattern like this in the drawer for a long time. The breaking of the hexagonal structures into interesting sub-objects enables interesting designs. Due to the great color contrasts within the shapes, an enormous number of individual patterns can be created, which can be scaled as desired in all directions. As a result, sticking on apparently complicated geometries is suddenly no longer a big problem.Β 
For lovers of playful geometric designs, the cubes are definitely an exciting solution.

Contents

1 sticker sheet Γ‘ 105x115mm with 35 reflective stickers

Material

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50Β° to +80Β° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

Application

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10Β° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

Care

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like