Fahrer Ebike Latz-E Plus Fender Mudflap - For 70-90mm Black
Fahrer Ebike Latz-E Plus Fender Mudflap - For 70-90mm Black
Fahrer Ebike Latz-E Plus Fender Mudflap - For 70-90mm Black

Fahrer Ebike Latz-E Plus Fender Mudflap - For 70-90mm Black

Regular price$23.99

/
Shipping calculated at checkout.

Our mud flap E-BIKE LATZ prevents the rainwater thrown up while driving from getting your shoes, pant legs or bike trailer wet and dirty. The mudguards often do not manage to drain the splash water sufficiently, which is why the splash guard serves as an extension of the mudguard. That makes the trip to the office or the bike ride even more comfortable. In addition to protecting clothing when riding on wet roads, the E-BIKE LATZ also prevents thrown stones from damaging the paint on the frame.

The mud flap is made from a truck tarpaulin and attached to the lower part of the mudguard as an extension. Thanks to the reinforced material, the splash guard remains dimensionally stable even at higher speeds and against a headwind, which is why it is ideal for use on e-bikes. The E-BIKE LATZ can optionally be mounted on front or rear wheel mudguards with a width of 70-90 mm on the mudguard struts. With the driver's logo application, it is also a discreet and stylish accessory. The CAP ensures a dry saddle.

Notice:

Suitable for aΒ mudguard width of 70-90mm

Features:

  • bicycle mudguard-extension made from truck tarpaulin
  • Dimensionally stable even at higher speeds
  • Color: black
  • Material: truck tarpaulin
  • Reinforced and optimized for use at higher speeds
  • Length: approx. 230 mm | Width top: 83 mm | Width bottom: 120 mm
  • Attachment to the fender stays: with cable ties (included)
  • Weight: approx. 36 grams
  • Designed in Berlin
  • Made in cooperation with workshops for people with disabilities
  • Scope of delivery:
    • Mud flap LATZ
    • 3 x cable ties

Mounting:

Thread a cable tie from behind through the two holes on the left and right of the bib so that the pointed ends are at the top and the fastener is at the bottom. Now turn the splash guard over and place it in the middle of the lower end of the mudguard. Place the cable ties on the left and right around the fender struts and tighten. Cut off the protruding ends of the cable ties with side cutters.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like