With this modular sticker kit for the entire bike frame, you can transform your bike into a reflective one-off in 10 steps! Glue your own design, no matter what frame geometry your bike has, whether fixie or e-bike.
This box not only contains a technically sophisticated product, but also our accumulated wealth of experience in user-friendly product design in the form of detailed step-by-step instructions. This allows you to achieve an absolutely convincing result in a very simple way. In addition, ours will help you Video-Tutorials, which you should definitely check out before you start stitching. All you need is a pair of scissors and basic trust in your intuition.
For particularly precise work and better access to hard-to-reach places on the frame, we recommend our premium upgrade, which includes professional tools (scalpel & squeegee) and a color-coordinated set Reflective SPOKES contains.
For example, if you own an e-bike, own a frame with a thick tube diameter, or just want to add more stickers, you can have us enclose an additional strip (similar to module A).
A box consists of several sticker sheets, which together cover a complete bicycle frame. Three wider strips (A, B, C) for the main tubes, and three pairs of strips for the fork, chainstays and rear stays (D, E, F) and one piece for the head tube (G). In addition, there are smaller patches for individual use.
The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.
The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.
The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.
The thickness of the stickers is around 0.1mm.
Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.
After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.