Reflective Berlin Reflective Foil Sets Flow Bullitt
Reflective Berlin Reflective Foil Sets Flow Bullitt
Reflective Berlin Reflective Foil Sets Flow Bullitt
Reflective Berlin Reflective Foil Sets Flow Bullitt
Reflective Berlin Reflective Foil Sets Flow Bullitt
Reflective Berlin Reflective Foil Sets Flow Bullitt

Reflective Berlin Reflective Foil Sets Flow Bullitt

Regular price$62.00

/
Shipping calculated at checkout.
Available for pickup in:
loading..

Color

A DECOR FOR THE CARGO CLASSIC FROM COPENHAGEN

Less is sometimes more. Our discreet sticker kit, perfectly tailored to the Larry vs Harry Bullitt, ensures all-round visibility and an individual design for your cargo bike.Β 

Filigree color stripes give the decor the necessary accent, while remaining unobtrusive. If you like it particularly subtle, you can go for the "Black Bike" variant, whose dark print on black reflective foil only creates a hidden structure when exposed to light.

A tin contains 1 set with 19 stickers, which can be partly glued together as elements (2x side frame, 2x fork, 2x front frame, 1x top tube, 1x mudguard, 1x badge) using the application film. Follow our guide or deconstruct and place the stickers however you like.

Material

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50Β° to +80Β° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

Application

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10Β° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

Care

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like